[Index]

QDOS TCP/IP and socket functionality

--- The Detailed Node Listing --- TCP/IP device driver interface
1. Introduction
2. TCP/IP device driver interface
3. Socket Library
2.1 open
2.2 IO operation
IO operation
2.2.1 Basic IO operations
2.2.2 Constants and Datatypes
2.2.3 Socket control and management
2.2.4 Socket specific IO
2.2.5 Netdb functions

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

1. Introduction

This document implements TCP/IP as implemented in UQLX. The implementation is due to Jonathan Hudson and is free, the hope is that native QDOS implementations can be kept compatible with it.

The characteristics of the implementation:

TCP/IP interface as device drivers
most of TCP functionality useable from SBasic. Full functionality with SBasic and some available toolkits.
implementation of BSD compatible socket library for c68 available

The general design of the interface is chosen so that features more to be used from Assembler/Basic follow QDOS interfacing conventions, those used from C/unix like applications follow conventions that make it easier to interface for such programs.

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

2. TCP/IP device driver interface

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

2.1 open

Following new devices are available for the trap#2,open call:

SCK_: generic socket, can be used for accepting connections or netdb access.
TCP_host:port
UDP_host:port: TCP or UDP protocol sockets. Both parameters optional

host and port can be both given either by numerical value or name. Eg "129.69.1.59:119" or "news.uni-stuttgart.de:nntp"

Supported keys in D3 are:

D3=0

creates a socket of requested type/protocol.

D3=1

TCP and UDP. host and port must be specified. Opens a connection TCP, or sets peer address for UDP sockets

returns without error if connection can't be completed within 1-2/50s, internally the connection buildup continues. Every i/o operation will be blocked until the connection succeeds or fails.

D3=2

bind TCP or UDP socket to an address. Such sockets can be used for accepting incoming connections

D3=channel_id

SCK only. accpet connection for socket specified by channel_id

returns error if can't complete immediately.

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

2.2 IO operation

Many operations typically not regarded as IO were provided by trap#3 calls to gain flexibility.

Basic IO operations (D0=0..7) are defined for connected TCP sockets. They may work for UDP sockets when peer address is set, however this use is strongly discouraged. Trap#3,[$48,$49] also work but it is not clear whether they are meaningful and thus may not be supported.

Generally, TCP/IP aware software should probably use the socket specific IO functions - send,recv,sendto,recvfrom.

When a trap#3 returns with an error, an additional c68 conforming error code may be queried by IP_ERRNO, IP_H_ERRNO and IP_H_STRERROR operations. This code is valid unless -1.

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

2.2.1 Basic IO operations

These are compatible to QDOS. The only questionable issue here is whether io.fstrg should always fill its buffer before returning as it does now, or rather mimic the behaviour of recv/recvfrom. Since the number of received characters will be in D1 anyway, this should not disturb any QDOS applications.

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

2.2.2 Constants and Datatypes

Here only the most important constants that are defined, the rest is in socket library header files.

EQU IP_LISTEN           $50
EQU IP_SEND             $51
EQU IP_SENDTO           $52
EQU IP_RECV             $53
EQU IP_RECVFM           $54
EQU IP_GETOPT           $55
EQU IP_SETOPT           $56
EQU IP_SHUTDWN          $57
EQU IP_BIND             $58
EQU IP_CONNECT          $59
EQU IP_FCNTL            $5a

EQU IP_GETHOSTNAME      $5b
EQU IP_GETSOCKNAME      $5c
EQU IP_GETPEERNAME      $5d

EQU IP_GETHOSTBYNAME    $5e
EQU IP_GETHOSTBYADDR    $5f
EQU IP_SETHOSTENT       $60
EQU IP_ENDHOSTENT       $61
EQU IP_H_ERRNO          $62

EQU IP_GETSERVENT       $63
EQU IP_GETSERVBYNAME    $64
EQU IP_GETSERVBYPORT    $65
EQU IP_SETSERVENT       $66
EQU IP_ENDSERVENT       $67

EQU IP_GETNETENT        $68
EQU IP_GETNETBYNAME     $69
EQU IP_GETNETBYADDR     $6a
EQU IP_SETNETENT        $6b
EQU IP_ENDNETENT        $6c

EQU IP_GETPROTOENT      $6d
EQU IP_GETPROTOBYNAME   $6e
EQU IP_GETPROTOBYNUMBER $6f
EQU IP_SETPROTOENT      $70
EQU IP_ENDPROTOENT      $71

EQU IP_INET_ATON        $72
EQU IP_INET_ADDR        $73
EQU IP_INET_NETWORK     $74
EQU IP_INET_NTOA        $75
EQU IP_INET_MAKEADDR    $76
EQU IP_INET_LNAOF       $77
EQU IP_INET_NETOF       $78

EQU IP_IOCTL            $79
EQU IP_GETDOMAIN        $7a
EQU IP_H_STRERROR       $7b

Following constants and datatypes are a mix from AmiTCP/IP and Linux definitions. Not every of them is meaningful or supported on every implementation.

Next some definitions useful for socket(), bind() and connect() calls and their trap#2/#3 equivalents.

#define	SOCK_STREAM	1		/* stream socket */
#define	SOCK_DGRAM	2		/* datagram socket */
#define	SOCK_RAW	3		/* raw-protocol interface */
#define	SOCK_RDM	4		/* reliably-delivered message */
#define	SOCK_SEQPACKET	5		/* sequenced packet stream */

#define	AF_UNSPEC	0		/* unspecified address family */
#define	AF_INET		2		/* internet: UDP, TCP, etc. */
#define	PF_UNSPEC	AF_UNSPEC       /* aliases */
#define	PF_INET		AF_INET


struct sockaddr {
	u_char	sa_len;			/* total length */
	u_char	sa_family;		/* address family */
	char	sa_data[14];		/* actually longer; address value */
};

struct sockproto {
	u_short	sp_family;		/* address family */
	u_short	sp_protocol;		/* protocol */
};


/* constants for getsockopt()/setsockopt() :*/

#define	SOL_SOCKET	0x1	/* options for socket level */
/* other values conforming IP may be possible */

#define SO_DEBUG      1
#define SO_REUSEADDR  2
#define SO_TYPE       3
#define SO_ERROR      4
#define SO_DONTROUTE  5
#define SO_BROADCAST  6
#define SO_SNDBUF     7
#define SO_RCVBUF     8
#define SO_KEEPALIVE  9
#define SO_OOBINLINE  10
#define SO_NO_CHECK   11
#define SO_PRIORITY   12
#define SO_LINGER     13        /* ignored, doesn't seem practicable in QDOS */
#define SO_BSDCOMPAT  14

Next, some netdb definitions. This seems like a nigthmare for assembler programmers..

struct	hostent {
	char	*h_name;	/* official name of host */
	char	**h_aliases;	/* alias list */
	int	h_addrtype;	/* host address type */
	int	h_length;	/* length of address */
	char	**h_addr_list;	/* list of addresses from name server */
#define	h_addr	h_addr_list[0]	/* address, for backward compatiblity */
};

struct	netent {
	char		*n_name;	/* official name of net */
	char		**n_aliases;	/* alias list */
	int		n_addrtype;	/* net address type */
	unsigned long	n_net;		/* network # */
};

struct	servent {
	char	*s_name;	/* official service name */
	char	**s_aliases;	/* alias list */
	int	s_port;		/* port number */
	char	*s_proto;	/* protocol to use */
};

struct	protoent {
	char	*p_name;	/* official protocol name */
	char	**p_aliases;	/* alias list */
	int	p_proto;	/* protocol # */
};

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

2.2.3 Socket control and management

IP_LISTEN 

Provides listen(2) functionality.

For a socket that has been bound during open or explicitly with
bind() this will set the number of connect requests that are queued
for accept(). Additional requests will not be handled and clients
receive a protocol specific error or retry will be initiated.
Incomming connections can be checked with io.pend trap.

	Input

	D0 = IP_LISTEN
	D1 = (int) backlog
	D3 = (short) timeout (should be -1)
	A0 = (chanid_t) channel ID

	Output

	D0 = result (0 if OK)

IP_BIND

Provides bind(2) functionality

	Input

	D0 = IP_BIND
	D1 = (int) namelen
	D3 = (short) timeout (-1)
    
	A0 = (chanid_t) Channel ID
	A2 = (struct  sockaddr  *) name;

	Output

	D0 = result


IP_CONNECT

Provides connect(2) functionality

  TCP: opens connection to host:prot
  UDP: (re)sets peer address to host:port

	Input

	D0 = IP_CONNECT
	D1 = (int) namelen
	D3 = (short) timeout (-1)
    
	A0 = (chanid_t) Channel ID
	A2 = (struct  sockaddr  *) name;

	Output

	D0 = result

  TCP: opens connection
  UDP: (re)sets peer address

  regardless of the timeout specified, the socket will remain 
  blocked (any IO will timeout or be delayed) until the connection 
  buildup succeeded or failed.
        

IP_FCNTL

Provides fcntl(2) functionality for IPDEV sockets only.

An awful hack for now.. don't use it unless you have to.

	Input
	
	D0 = IP_FCNTL
	D1 = (int) cmd;
	D2 = (int) arg;
	D3 = (short) timeout -1;

	A0 = (chanid_t) channel ID

	Output

	D0 = result


IP_GETOPT

Provides (some) getsockopt functionality

	Input

	D0 = IP_GETOPT
	D1 = (int) optlen 
	D2 = (int) level
	D3 = (short) timeout (-1)

	A0 = (chanid_t) channel ID
	A1 = (void *) optval address
	A2 = (int) optname

	Output
	
	D0 = result
	D1 = optlen

IP_SETOPT

Provides (some) setsockopt functionality

	Input

	D0 = IP_SETOPT
	D1 = (int) optlen 
	D2 = (int) level
	D3 = (short) timeout (-1)

	A0 = (chanid_t) channel ID
	A1 = (void *) optval address
	A2 = (int) optname

	Output
	
	D0 = result


IP_SHUTDWN

Provides shutdown(2) functionality

	Input

	D0 = IP_SHUTDWN
	D1 = (int) how          # how=0 disable receive ,1 send, 
                                #     2 send&receive
	D3 = (short) timeout (-1);
    
	A0 = (chanid_t) Channel ID

	Output
	
	D0 = result

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

2.2.4 Socket specific IO

send and recv differ from io.sstrg and io.fstrg in that they message oriented and allow chunks longer than 32k.

recv and recvfrom return immediately when data is available, or after the first message arrives.

send and recv can be (unlike sendto, recvfrom for UDP) applied only to sockets that have been connected previously.

IP_SEND

Provides send(2) functionality

	Input

	D0 = IP_SEND;
	D1 = (uint) flag;
	D2 = (int) buffer size;
	D3 = (short) timeout (should be -1)

	A0 = (chanid_t) channel ID
	A1 = (void *) buffer address

	Output

	D0 = result
	D1 = (int) bytes written

	A1 = buffer address + bytes written

IP_SENDTO

Provides sendto(2) functionality

	Input

	D0 = IP_SENDTO;
	D1 = (uint) flag;
	D2 = (int) buffer size;
	D3 = (short) timeout (should be -1)

	A0 = (chanid_t) channel ID
	A1 = void *) buffer address
	A2 = parameter block (2 long words)
		params[0] = (struct sockaddr*) to
		params[1] = (int) tolen;
    

	Output

	D0 = result
		+ve => number of bytes sent
		-ve => error code


IP_RECV

Provides recv(2) functionality

	Input

	D0 = IP_RECV
	D1 = (uint) flag
	D2 = (int) buffer size
	D3 = (short) timeout (should be -1)

	A0 = (chanid_t) channel ID
	A1 = (void *) buffer address

	Output

	D0 = result code
	D1 = bytes written


IP_RECVFM

Provides recvfrom(2) functionality

	D0 = IP_RECVFM
	D1 = (uint) flag
	D2 = (int) buffer size
	D3 = (short) timeout (-1)

	A0 = (chanid_t) channel ID
	A1 = (void *) buffer address
	A2 = parameter block (2 long words)
		params[0] = (struct sockaddr*) from
		params[1] = (int) fromlen;
    
	Output

	D0 = result
		+ve => number of bytes sent
		-ve => error code
	D1 = size of returned struct sockaddr

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

2.2.5 Netdb functions

IP_GETHOSTNAME

Provides gethostname(2) functionality

	Input

	D0 = IP_GETHOSTNAME;
	D2 = (int) namebufferlen
	D3 = (short) timeout (-1)

	A0 = (chanid_t) channel ID
	A1 = (char *)namebuffer;

	Output

	D0 = result


IP_GETSOCKNAME

Provides getsockname(2) functionality


	Input

	D0 = IP_GETSOCKNAME
	D2 = (int) namelen
	D3 = (short) timeout (-1);

	A0 = (chanid_t) channel ID
	A1 = (struct sockaddr *) name

	Output

	D0 = result
	D1 = namelen



IP_GETPEERNAME

Provides getpeername(2) functionality

	Input

	D0 = IP_GETPEERNAME
	D2 = (int) addrlen
	D3 = (short) timeout (-1);

	A0 = (chanid_t) channel ID
	A1 = (struct sockaddr *) addr

	Output

	D0 = result
	D1 = addrlen



IP_GETHOSTBYNAME

Provides gethostbyname(2) functionality

	Input

	D0 = IP_GETHOSTBYNAME
	D3 = (short) timeout (-1)

	A0 = (chanid_t *) channel ID
        A1 = (char *) name			// NULL terminated
        A2 = (struct hostent *)hostent buffer	// minimum of 500 bytes

The buffer pointed to by A2 must be at large enough to hold the
largest struct hostent returned.

	D0 = result


IP_GETHOSTBYADDR

Provides gethostbyaddr(2) functionality

	Input

	D0 = IP_GETHOSTBYNAME
        D1 = (int) addrlen;
        D2 = (int) type;
	D3 = (short) timeout (-1)

	A0 = (chanid_t *) channel ID
        A1 = (char *) addr
        A2 = (struct hostent *)hostent buffer	// minimum of 500 bytes

The buffer pointed to by A2 must be at large enough to hold the
largest struct hostent returned.

	D0 = result



IP_SETHOSTENT      
IP_SETSERVENT      
IP_SETNETENT        
IP_SETPROTOENT      

Provides set*ent(2) functionality

	Input

	D0 = IP_SET*ENT
        D1 = (int) stayopen;
	D3 = (short) timeout (-1)
	A0 = (chanid_t *) channel ID

	Output

	D0 = result


IP_ENDHOSTENT     
IP_ENDSERVENT       
IP_ENDNETENT        
IP_ENDPROTOENT      

Provides end*ent(2) functionality

	Input

	D0 = IP_END*ENT
	D3 = (short) timeout (-1)
	A0 = (chanid_t *) channel ID

	Output

	D0 = result



IP_GETSERVBYNAME    
IP_GETSERVBYPORT    
IP_GETSERVENT       

Provides get*ent(2) functionality

	Input

	D0 = IP_GET*ENT
	D3 = (short) timeout (-1)
	A0 = (chanid_t *) channel ID
	A2 = (void *) buffer		// cast as necessary

	Output

	D0 = result


IP_GETNETBYNAME
 
Provides getnetbyname(2) functionality

	Input

	D0 = IP_GETNETBYNAME
	D3 = (short) timeout (-1)
        A0 = (chanid_t)channel ID
        A1 = (char *)name
	A2 = (struct netent *)netent buffer

	Output

	D0 = result

 
IP_GETNETBYADDR     

Provides getnetbyname(2) functionality

	Input

        D0 = IP_GETNETBYADDR;
        A0 = (chanid_t) channel ID
        A2 = (struct netent *)netent buffer
        D1 = (uint) net
        D2 = (int) type
        D3 = (short) timeout (-1)

	Output

	D0 = result


IP_GETPROTOBYNAME

Provides getprotobyname(2) functionality

	Input

	D0 = IP_GETPROTOBYNAME;
        D3 = (short) timeout (-1)
        A0 = (chanid_t) channel ID
        A1 = (char *)name;
        A2 = (struct protoent *)protoent buffer

	Output

	D0 = result


IP_GETPROTOBYNUMBER 

Provides getprotobynumber(2) functionality

	Input

	D0 = IP_GETPROTOBYNUMBER;
	D1 = (int) proto number
        D3 = (short) timeout (-1)
        A0 = (chanid_t) channel ID
        A2 = (struct protoent *)protoent buffer

	Output

	D0 = result


IP_INET_ATON        

Provides inet_aton(2) functionality

	Input

        D0 = IP_INET_ATON;
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
        A1 = (char *) name
        A2 = ( struct in_addr *)inaddr buffer            

	Output

	D0 = result



IP_INET_ADDR        

Provides inet_addr(2) functionality

	Input

        D0 = IP_INET_ADDR
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
        A1 = (char *) name

	Output

	D0 = result



IP_INET_NETWORK     

Provides inet_network(2) functionality

	Input

        D0 = IP_INET_NETWORK
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
        A1 = (char *) name

	Output

	D0 = result



IP_INET_NTOA        

Provides (2) functionality

	Input

	D0 = IP_INET_NTOA
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
        A1 = (struct in_addr *) net address buffer
        A2 = (char *) result buffer            

	Output

	D0 = result



IP_INET_MAKEADDR    

Provides (2) functionality

	Input

        D0 = IP_INET_MAKEADDR
        D1 = (int) network number
        D2 = (int) host address
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
        A2 = (struct in_addr *) result buffer            

	Output

	D0 = result



IP_INET_LNAOF       

Provides inet_lnaof (2) functionality

	Input

        D0 = IP_INET_LNAOF;
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
        A1 = (struct in_addr *) net address buffer            

	Output

	D0 = result



IP_INET_NETOF       

Provides inet_netof(2) functionality

	Input

        D0 = IP_INET_NETOF;
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
        A1 = (struct in_addr *) net address buffer            

	Output

	D0 = result


IP_IOCTL            

Provides ioctl(2) functionality

	Input

	D0 = IP_IOCTL
	D1 = request
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
	A1 = (char *) argp

	Output

	D0 = result


IP_GETDOMAIN        

Provides getdomainname(2) functionality

	Input

        D0 = IP_GETDOMAIN;
        D2 = len;
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
        A1 = name;

	Output

	D0 = result


IP_H_ERRNO        

Provides h_errno (2) functionality

	Input	
	
	D0 = IP_H_ERRNO
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID

	Output
	
	D0 = result
	D1 = h_errno



IP_H_STRERROR	

Provides special functionality to return the text for h_errno

	Input

        D0 = IP_H_STRERROR
        D3 = (short) timeout (-1)
	A0 = (chanid_t) channel ID
	A1 = buffer for text

	Output

	D0 = result

[ < ]

[ > ]

[ << ]

[ Up ]

[ >> ]

[Top]

[Contents]

[Index]

[ ? ]

3. Socket Library

int socket(int domain, int type, int protocol);
int bind(int s, const struct sockaddr *name, int namelen);
int listen(int s, int backlog);
int accept(int s, struct sockaddr *addr, int *addrlen);
int connect(int s, const struct sockaddr *name, int namelen);
int sendto(int s, const void *msg, int len, unsigned int flags, 
	    struct sockaddr *to, int tolen);
int send(int s, const void *msg, int len, unsigned int flags);
int recvfrom(int s, void *buf, int len, unsigned int flags, 
	      struct sockaddr *from, int *fromlen);
int recv(int s, void *buf, int len, unsigned int flags);
int shutdown(int s, int how);
int setsockopt(int s, int level, int optname, void *optval, int optlen);
int getsockopt(int s, int level, int optname, void *optval, int *optlen);
int getsockname(int s, struct sockaddr *name, int *namelen);
int getpeername(int s, struct sockaddr *name, int *namelen);

u_long inet_addr(const char *);
u_long inet_network(const char *);

struct hostent  *gethostbyname(const char *name);
struct hostent  *gethostbyaddr(const char *addr, int len, int type);
struct netent   *getnetbyname(const char *name);
struct netent   *getnetbyaddr(int net, int type);
struct servent  *getservbyname(const char *name, const char *proto);
struct servent  *getservbyport(int port, const char *proto);
struct protoent *getprotobyname(const char *name);
struct protoent *getprotobynumber(int proto);

char *inet_ntoa(struct in_addr);
struct in_addr inet_makeaddr(int , int);
unsigned long inet_lnaof(struct in_addr);
unsigned long inet_netof(struct in_addr);
int inet_aton(const char *cp, struct in_addr *inp);

int gethostname(char *name, size_t len);

int ioctl(int,int,void *);
int sock_fcntl(int s, int action, int val);

[Top]

[Contents]

[Index]

[ ? ]

1. Introduction
2. TCP/IP device driver interface
- 2.1 open
- 2.2 IO operation
3. Socket Library

[Top]

[Contents]

[Index]

[ ? ]

About This Document

This document was generated by badaman on January, 31 2008 using texi2html 1.76.

The buttons in the navigation panels have the following meaning:

Button	Name	Go to	From 1.2.3 go to
[ < ]	Back	previous section in reading order	1.2.2
[ > ]	Forward	next section in reading order	1.2.4
[ << ]	FastBack	beginning of this chapter or previous chapter	1
[ Up ]	Up	up section	1.2
[ >> ]	FastForward	next chapter	2
[Top]	Top	cover (top) of document
[Contents]	Contents	table of contents
[Index]	Index	index
[ ? ]	About	about (help)

where the Example assumes that the current position is at Subsubsection One-Two-Three of a document of the following structure:

1. Section One
- 1.1 Subsection One-One
  - ...
- 1.2 Subsection One-Two
  - 1.2.1 Subsubsection One-Two-One
  - 1.2.2 Subsubsection One-Two-Two
  - 1.2.3 Subsubsection One-Two-Three <== Current Position
  - 1.2.4 Subsubsection One-Two-Four
- 1.3 Subsection One-Three
  - ...
- 1.4 Subsection One-Four

This document was generated by badaman on January, 31 2008 using texi2html 1.76.

QDOS TCP/IP and socket functionality

1. Introduction

2. TCP/IP device driver interface

2.1 open

2.2 IO operation

2.2.1 Basic IO operations

2.2.2 Constants and Datatypes

2.2.3 Socket control and management

2.2.4 Socket specific IO

2.2.5 Netdb functions

3. Socket Library

Table of Contents

About This Document